Product description
The KM48 is a high-capacity mobile industrial evaporative air cooler designed for large warehouses, production halls, workshops and other industrial spaces up to approximately 600 m².
With a maximum airflow of 48,000 m³/h, continuously adjustable airflow and integrated Pureflow G4 air pre-filtration, the KM48 is designed for cooling large industrial work areas where high air volume and robust operation are required.
Technical overview
- Maximum airflow: 48,000 m³/h
- Recommended area: up to 600 m²
- Airflow adjustment: continuously adjustable from 0 to 100%
- Air pre-filtration: Pureflow G4 pre-filter
- Water treatment: integrated UV treatment
- Swing function: not included
- Application class: industrial
- Warranty: 5 years
Operating principle
The KM48 uses evaporative, also known as adiabatic, cooling. Warm ambient air is drawn through a water-wetted evaporative medium. As water evaporates, heat is absorbed from the incoming air before the cooled air is discharged into the workspace.
The process does not require a conventional refrigerant circuit or compressor-based refrigeration system. Cooling is generated through the combination of water evaporation and high-volume airflow.
Because evaporative cooling increases the moisture content of the treated air, sufficient air renewal is important. Loading doors, windows, roof vents, ventilation openings or mechanical extraction should allow humidified air to leave the building while fresh air enters.
Actual cooling performance depends on ambient temperature, relative humidity, ventilation, ceiling height, internal heat load and the position of the cooler within the workspace.
Material options
No selectable material variants are specified for the KM48. The unit is supplied as a complete mobile industrial evaporative cooling system.
Available micron ratings
The KM48 uses Pureflow G4 air pre-filtration rather than a selectable micron-rated filtration stage. The G4 pre-filter is designed to reduce coarse airborne contamination entering the cooling system.
G4 pre-filtration should not be interpreted as HEPA or fine-particle filtration. No selectable micron ratings are specified for this model.
Design and construction
The KM48 is designed for high-volume industrial cooling in large workspaces. Its mobile construction allows the unit to be positioned close to occupied zones, production processes or areas with elevated heat loads.
- Heavy-duty mobile industrial construction
- Maximum airflow of 48,000 m³/h
- Continuously adjustable airflow from 0 to 100%
- Pureflow G4 incoming-air pre-filtration
- Integrated UV water treatment
- Designed for large-volume industrial spaces
- Mobile positioning for targeted or zoned cooling
- 5-year warranty
Typical applications
- Large industrial warehouses
- Distribution and logistics centres
- Production halls
- Heavy industrial workshops
- Metalworking and fabrication areas
- Assembly halls
- Packaging and processing facilities
- Industrial maintenance facilities
- Large loading and order-picking zones
- Local or zoned cooling in high-volume buildings
Key benefits
- Suitable for industrial spaces up to approximately 600 m²
- Maximum airflow of 48,000 m³/h
- Continuously adjustable airflow from 0 to 100%
- Pureflow G4 air pre-filtration
- Integrated UV water treatment
- Mobile design for flexible positioning
- Designed for large industrial volumes
- Suitable for targeted or zoned cooling
- Evaporative cooling without refrigerant gas
- 5-year warranty
Configuration and quotation
The stated coverage of up to 600 m² is a general sizing guideline. Large industrial spaces should be assessed according to building volume, ventilation, internal heat load and working conditions rather than floor area alone.
For a technical recommendation or quotation, provide the following information where possible:
- Floor area in m²
- Approximate ceiling height
- Total building or cooling-zone volume
- Type of industrial process or workspace
- Typical indoor temperature during warm periods
- Available doors, ventilation or mechanical extraction
- Dust level and type of airborne contamination
- Machinery, ovens or other heat-generating processes
- Number and location of occupied workstations
- Required cooling area: local zones or complete workspace
For very large buildings or distributed work zones, multiple coolers may provide more effective airflow distribution than a single unit. The appropriate configuration should therefore be selected according to the specific site conditions.